EasyManua.ls Logo

NEC SL2100 - Page 398

NEC SL2100
978 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Guide to Feature Programming
Program
No.
Program Name Input Data Default
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
21-04-01 Toll Restriction Class for Extensions - Restric-
tion Class
1 ~ 15 = Toll Class 1 ~ 15 2
21-05-01 Toll Restriction Class - International Call Restric-
tion Table
0 = Unassign (No international
restrict table applied.)
1 = Assign (Table in PRG
21-06-01 is applied.)
Class No1, 6 ~ 15 : 0
Class No2 ~ 5 : 1
21-05-02 Toll Restriction Class - International Call Permit
Code Table
0 = Unassign (No international
permit table applied.)
1 = Assign (Table in PRG
21-06-02 is applied.)
Class No1, 3 ~ 15 : 0
Class No2 : 1
21-05-04 Toll Restriction Class - Maximum Number of Dig-
its Table Assignment
0 = No Table Applied
1 ~ 4 = Tables 1 ~ 4 ( Defined in
PRG 21-06-03)
Class No1 ~ 2, 6 ~ 15 :
0
Class No3 : 1
Class No4 : 2
Class No5 : 3
21-05-05 Toll Restriction Class - Common Permit Code Ta-
ble
0 = Unassign (No common per-
mit table applied.)
1 = Assign (Table in PRG
21-06-04 is applied.)
Class No1, 8 ~ 15 : 0
Class No2 ~ 7 : 1
21-05-06 Toll Restriction Class - Common Restriction Ta-
ble
0 = Unassign (No common re-
strict table applied.)
1 = Assign (Table in PRG
21-06-05 is applied.)
Class No1, 6 ~ 15 : 0
Class No2 ~ 5 : 1
21-05-07 Toll Restriction Class - Permit Code Table 0 = No Permit Table Assigned
1 ~ 4 = Permit Tables 1 ~ 4 (as-
signed in PRG 21-06-06)
Class No1 ~ 2, 6 ~ 15 :
0
Class No3 : 1
Class No4 : 2
Class No5 : 3
21-05-08 Toll Restriction Class - Restriction Table 0 = No Permit Table Assigned
1 ~ 4 = Restrict Tables 1 ~ 4 (as-
signed in PRG 21-06-07)
0
21-05-09 Toll Restriction Class - Restriction for Common
Speed Dials
0 = Does Not Restrict
1 = Following Restriction Check
0
21-05-10 Toll Restriction Class - Restriction for Group
Speed Dials
0 = Does Not Restrict
1 = Following Restriction Check
0
21-05-11 Toll Restriction Class - Intercom Call Restriction 0 = Disable (ICM call not restric-
ted.)
1 = Enable (ICM call restricted.)
0
21-05-12 Toll Restriction Class - PBX Call Restriction 0 = Disable (PBX/CTX call not
restricted.)
1 = Enable (PBX/CTX call re-
stricted.)
Class 1 ~ 6 = 0
Class 7 = 1
Class 8 ~ 15 = 0
21-05-13 Toll Restriction Class - Restriction of Tie Line
Calls
0 = Disable (No)
1 = Enable (Yes)
0
21-05-14 Toll Restriction Class - Trunk Transfer Restric-
tion on Incomplete Dial
0 = Not allow
1 = Allow
0
21-05-15 Toll Restriction Class - Common Hold Restric-
tion on Incomplete Dial
0 = Not allow
1 = Allow
0
21-06-01 Toll Restriction Table Data Setup - International
Call Restriction Table
Tables 1~10 = No Set-
ting
21-06-02 Toll Restriction Table Data Setup - International
Call Permit Code Table
Tables 1~20 = No Set-
ting
SL2100 ISSUE 1.0
1-384
Hotel/Motel - Toll Restriction (When Checked In)
H

Table of Contents

Other manuals for NEC SL2100

Related product manuals