NEC SL2100 - Page 406

Intercom
Voice Response System (VRS)
Guide to Feature Programming
Program
No.
Program Name Input Data Default
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
20-08-20 Class of Service Options (Outgoing Call Service)
- Hot Key Pad
0 = Off
1 = On
COS 01 ~ 15 = 0
Operation
To place an intercom call using Hot Key-Pad:
The Multiline Terminal is idle. No need to press Speaker key.
1. Dial the extension.
2. Dialed extension rings.
To place a trunk call using Hot Key-Pad:
The Multiline Terminal is idle. No need to press Speaker key.
1. Dial the trunk access code, 0 by default, and the external destination number you wish to call.
SL2100 ISSUE 1.0
1-392
Hot Key-Pad
H