• Email forwarding requires one (1) InMail Email Notification License (1014) for the system. .
• Constant Message Count is displayed on a telephone display until another activity needs the display
(i.e., if a call is made or received on the telephone). To have the message count display again, the
telephone needs to receive a new voice mail message or a new call into the voice mailbox.
• The Quick Transfer to Voice Mail feature is allowed when:
- Listening to the Ring Back Tone (RBT).
- Listening to the Call Waiting Tone (CWT).
- In Handsfree Answerback Mode.
- In Voice Over Mode.
• When Quick Transfer to Voice Mail is accessed, the Voice Over feature is canceled.
• While on an intercom (ICM) call, dial the Quick Transfer Access Code (default: 8) to automatically
transfer to that station Voice Mail box.
• The Quick Transfer to Voice Mail is not allowed when caller is:
- Listening to the busy tone (BT).
- Talking on an internal line.
- Talking on an outside line.
- Making a conference call.
• Extension numbers cannot start with 0, 9,
or #.
• Distribution List members can only have 2 or 3 digit extension IDs.
• Live Record does not work for monitored calls.
• Live Record does not work for conference calls.
• Fixed Call Forwarding can be used to transfer a user’s unanswered calls to their voice mail. Call
Forwarding does not have to be programmed manually by each user.
• Caller ID information is passed from the Voice Mail to an extension for pre-answer display on an
unscreened transfer from Voice Mail.
• Off-premise notification and external extensions require access to outside lines.
• When the voice mail places a call on hold, it uses Group Hold. Any line appearances for the trunk
shows the hold flash rate, however, a user cannot pick up this call (a busy signal is heard).
• Updating the system time also updates the InMail time.
• The displayed message count for New and Saved messages does not update until the mailbox user
hangs up and calls back into the InMail.
• InMail and Analog Voice Mail cannot be used at the same time in the same system.
• The number of speech path channels on the CPU for the In Mail and the VRS feature are shared
and depends if the EXIFB-C1 board is installed.
- Without an EXIFB-C1 board installed the systems supports a maximum of four channels for VRS
and/or InMail.
- With an EXIFB-C1 board installed, the system supports a maximum of 16 channels for VRS
and/or InMail. The maximum number of channels supported for InMail is eight.
• When installing a SDVMS/SDVML card onto the CPU-C1 the system MUST be powered off. Never
install or uninstall the SDVMS/SDVML card while the system is under power.
Default Settings
Disabled
System Availability
Terminals
All Terminals
SL2100
ISSUE 1.0
1-406
InMail
I
To Next Page
Loading...
