NEC SL2100 - Page 429

Program
No.
Program Name Input Data Default
47-11-02 InMail Answer Table Options -
Override Mailbox Category (Override MB Ctg)
Use this option to specify the category of the mail-
box where Automated Attendant calls should route
when you enable Answer Schedule Override.
• If the Override Mailbox is a Subscriber Mailbox,
the outside caller hears the mailbox greeting (if re-
corded) and can leave a message.
• If the Override Mailbox is a Master Mailbox, the
outside caller shears the recorded announcement.
Depending on how the Announcement Mailbox is
programmed, InMail then hangs up, reroutes the
call, or provides additional dialing options.
• If the Override Mailbox is a Routing Mailbox, the
outside caller hears the instruction menu and can
dial any option allowed by the associated Dial Ac-
tion Table.
If any of the Input Data values are entered, the ter-
minal displays the Override Mailbox Number se-
lection (below).
0 = Undefined
1 = Subscriber Mailbox - STA
2 = Master Mailbox
3 = Routing Mailbox
0
47-11-02 InMail Answer Table Options -
Override Mailbox Number (Override MB Num)
Use this option to specify the mailbox where Auto-
mated Attendant calls should route when you enable
Answer Schedule Override. The mailbox number
you select in this option should match the mailbox
category specified in 47-11-02 : Override Mailbox
Category above.
Up to 3 digits (using 0 ~ 9) No Setting
47-11-03 InMail Answer Table Options -
Default Mailbox Category (Default MB Ctg)
Use this option to specify the category of mailbox
used as the Default Mailbox.
• If the Default Mailbox is a Subscriber Mailbox,
the outside caller hears the mailbox greeting (if re-
corded) and can leave a message.
• If the Default Mailbox is a Master Mailbox, the
outside caller hears the recorded announcement.
Depending on how the Announcement Mailbox is
programmed, InMail then hangs up, reroutes the
call, or provides additional dialing options.
• If the Default Mailbox is a Routing Mailbox, the
outside caller hears the instruction menu and can
dial any option allowed by the associated Dial Ac-
tion Table.
If any of the Input Data values are entered, the ter-
minal displays the Override Mailbox Number se-
lection (below). If any of the Input Data values are
entered, the terminal displays the Override Mail-
box Number selection (below).
0 = Undefined
1 = Subscriber Mailbox - STA
2 = Master Mailbox
3 = Routing Mailbox
Answer Table 1 = 3
Answer Table 2 ~ 16 =
0
47-11-03 InMail Answer Table Options -
Default Mailbox Number (Default MB Num)
Use this option to set the Answer Table Default Mail-
box number. InMail uses the Default Mailbox when
an Answer Schedule is not in effect. By default, this
occurs at all times other than Monday through Fri-
day from 8:30 AM to 5:00 PM.
Up to 3 digits (using 0 ~ 9) Answer Table 1 = 1
Answer Table 2 ~ 16 =
No setting
47-11-04 InMail Answer Table Options -
Next Answer Table
When 10 Answer Schedules in an Answer Table are
not sufficient, use this option to link two Answer Ta-
bles together. InMail treats the two linked tables as a
single 20 entry Answer Table.
Answer Table (0 ~ 16)
0 = Undefined
0
47-12-01 InMail Answer Schedules - Schedule Type 0 = Undefined
1 = Day of the Week
2 = Range of Days
3 = Date
Answer Table 1/
Schedule 1 = 2
All other schedules = 0
ISSUE 1.0 SL2100
Features and Specifications Manual 1-415
I