NEC SL2100 - Page 442

Default Settings
Disabled
System Availability
Terminals
All Multiline Terminals
Trunks
The following Trunks support sending Caller ID:
• Analog Line
• ISDN Line (BRI)
• ISDN Line (PRI)
• SIP Line
Required Component(s)
• CPU-C1 board
Related Features
Abbreviated Dialing/Speed Dial
Caller ID - Flexible Ringing
Mobile Extension
InMail
Guide to Feature Programming
Program
No.
Program Name Input Data Default
13-04-01 Speed Dialing Number and Name - Number Maximum of 36 digits (0 ~ 9,
*
,
#, @, P, R)
@ = Wait for Answer Supervision
- ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
No Setting
13-04-02 Speed Dialing Number and Name - Name Maximum 12 Characters (Use di-
al pad to enter name)
No Setting
13-04-11 Speed Dialing Number and Name - Mailbox Num-
ber
0 ~ 128, 900 ~ 931 0
15-22-01 Mobile Extension Setup - Mobile Extension Tar-
get Setup
0 = No Setting
1 ~ 999 = Speed Dial Bin 1 ~ 999
(PRG 13-04)
0
SL2100 ISSUE 1.0
1-428
InMail-Automatic Access to VM by Caller ID
I