NEC SL2100 - Page 506

Program
No.
Program Name Input Data Default
15-05-47 IP Telephone Terminal Basic Data Setup - Regis-
tration Expire Timer for NAT
0 = Disable
60 ~ 65535 (sec)
180
15-05-48 IP Telephone Terminal Basic Data Setup - Sub-
scriber Expire Timer for NAPT
0 = Disable
60 ~ 65535 (sec)
180
84-23-01 DT800/DT700 Multiline Basic Information Setup -
Registration Expire Timer
60 ~ 65535 seconds 180 seconds
84-23-02 DT800/DT700 Multiline Basic Information Setup -
Subscribe Expire Timer
60 ~ 65535 seconds 3600 seconds
84-24-28 DT800/DT700 Multiline CODEC Basic Information
Setup - Audio Capability Priority
0 = G.711
2 = G.729
3 = G.722
0
84-26-01 VoIP Basic Setup (DSP) - IP Address xxx.xxx.xxx.xxx 172.16.0.20 ~
84-26-02 VoIP Basic Setup (DSP) - RTP Port Number 0 ~ 65534 10020
84-26-03 VoIP Basic Setup (DSP) - RTCP Port Number RTP Port Number + 1 10021
In addition to the above programming, define the programming options as required for the system
features. Refer to the SL2100 Programming Manual for programming details.
Operation
None
SL2100 ISSUE 1.0
1-492
IP Multiline Station (SIP)
I