NEC SL2100 - Page 516

Program
No.
Program Name Input Data Default
10-12-10 CPU Network Setup - Subnet Mask (VoIPDB) 128.0.0.0 | 192.0.0.0 | 224.0.0.0 |
240.0.0.0 | 248.0.0.0 | 252.0.0.0 |
254.0.0.0 | 255.0.0.0 |
255.128.0.0 | 255.192.0.0 |
255.224.0.0 | 255.240.0.0 |
255.248.0.0 | 255.252.0.0 |
255.254.0.0 | 255.255.0.0 |
255.255.128.0 | 255.255.192.0 |
255.255.224.0 | 255.255.240.0 |
255.255.248.0 | 255.255.252.0 |
255.255.254.0 | 255.255.255.0 |
255.255.255.128 |
255.255.255.192 |
255.255.255.224 |
255.255.255.240 |
255.255.255.248 |
255.255.255.252 |
255.255.255.254 |
255.255.255.255 |
Refer to the program-
ming manual for all the
possible valid subnet
mask entries.
(default = 255.255.0.0)
10-19-01 VoIPDB DSP Resource Selection - VoIPDB DSP
Resource Selection
0 = Common use for both IP ex-
tensions and trunks
1 = Use for IP extensions
2 = Use for SIP trunks
3 = User for Networking
5 = Blocked
6 = Common without unicast
paging
7 = Multicast paging
8 = Unicast paging
Resource 1 ~ 128 = 0
10-26-03 IP System Operation Setup - SIP Peer to Peer
Mode
0 = Off
1 = On
1
15-03-03 Single Line Telephone Basic Data Setup - Termi-
nal Type
0 = Normal
1 = Special
0
VoIP ToS Setup:
The SL2100 supports Quality of Service (QoS) Marking for the Session Initiation Protocol (SIP).
Program
No.
Program Name Input Data Default
84-10-01 ToS Setup - ToS Mode 0 = Disable (Invalid)
1 = IP Precedence
2 = Diffserv
0
IP Extension Numbering:
Program
No.
Program Name Input Data Default
11-02-01 Extension Numbering - Extension Number Dial (Up to 8 digits) Extension Port Num-
ber : Extension Number
001 ~ 064 : 101 ~ 164
065 ~ 128 : No Setting
SL2100 ISSUE 1.0
1-502
IP Single Line Terminal (SIP)
I