NEC SL2100 - Page 547

Program
No.
Program Name Input Data Default
84-01-09 H.323 Trunk Basic Information Setup - G.729 Jit-
ter Buffer (average)
0 ~ 300 ms 120
84-01-15 H.323 Trunk Basic Information Setup - Jitter Buf-
fer Mode
1 = Fixed
3 = Self adjusting
3
84-01-16 H.323 Trunk Basic Information Setup - G.711 Jit-
ter Buffer( min)
0 ~ 300 ms 30
84-01-17 H.323 Trunk Basic Information Setup - G.711 Jit-
ter Buffer (average)
0 ~ 300 ms 60
84-01-18 H.323 Trunk Basic Information Setup - G.711 Jit-
ter Buffer (max)
0 ~ 300 ms 120
84-01-22 H.323 Trunk Basic Information Setup - VAD
Threshold
1 ~ 30 (- 19 dB ~ + 10 dB and
self adjustment)
1 = - 19 dB (- 49 dBm)
:
20 = 0 dB (- 30 dBm)
:
29 = 9 dB (- 21 dBm)
30 = 10 dB (- 20 dBm)
20
84-01-33 H.323 Trunk Basic Information Setup - Priority
CODEC setting
Priority of voice encoding method.
0 ~ 3
0 = G711_PT
1 = Not Used
2 = G729_PT
3 = G722_PT
0
84-33-06 FAX over IP Setup - T.38 FAX Max Speed 1 = V.27ter, 4800 bps
2 = V.29, 9600 bps
2
84-33-08 FAX over IP Setup - T.38 Error protection depth
for Signaling
0 ~ 2 0
84-33-09 FAX over IP Setup - T.38 Error protection depth
for Data
0 ~ 2 0
84-33-10 FAX over IP Setup - TCF Operation Setting 1 = Training signal (TCF) of the
fax is locally generated and
checked.
2 = Training signal (TCF) of the
fax is sent over the network.
1
84-33-01 FAX over IP Setup - FAX Relay Mode 0 = Disable
1 = Enable
2 = Each port mode
0
84-34-01 VoIPDB DTMF Setup - DTMF Relay Mode 0 = Disable
1 = RFC2833
2 = H.245
0
84-01-63 H.323 Trunk Basic Information Setup - Number
of G.722 audio frames
1 ~ 4
1 = 10 ms
2 = 20 ms
3 = 30 ms
4 = 40 ms
3
84-01-65 H.323 Trunk Basic Information Setup - G.722 Jit-
ter Buffer (min)
0 ~ 300 ms 30
84-01-66 H.323 Trunk Basic Information Setup - G.722 Jit-
ter Buffer (average)
0 ~ 300 ms 60
84-01-67 H.323 Trunk Basic Information Setup - G.722 Jit-
ter Buffer (max)
0 ~ 300 ms 120
Operation
None
ISSUE 1.0
SL2100
Features and Specifications Manual 1-533
I