System Availability
Terminals
Multiline Terminals
Required Component(s)
None
Related Features
Automatic Route Selection (ARS) / Central Office Calls, Answering / Central Office Calls,
Placing
Program incoming and outgoing access and routing options.
Off Hook Signaling
If enabled, a user hears Call Waiting beeps if additional calls are waiting behind a loop key.
Programmable Function Keys
If you have a line and loop key for the same trunk, the line key has precedence. An incoming call rings the
line key, not the loop key. When you press the loop key for an outgoing call, the line key lights.
Ring Groups
Trunks ring terminals according to their Ring Group assignments (PRG 22-04 and PRG 22-05).
Direct Inward Dialing (DID) / Direct Inward Line (DIL) / Direct Inward System Access (DISA)
Transferred DID, DIL and DISA calls do not require ring group programming.
Guide to Feature Programming
Program
No.
Program Name Input Data Default
14-05-01 Trunk Group - Trunk Group Number Trunk Port 1 ~ 128 = Priority 1 ~
128
Trunk Group number = 0 ~ 50
Refer to Programming
Manual.
14-07-01 Trunk Access Map Setup - Access Map 0 = No access
1 = Outgoing access only
2 = Incoming access only
3 = Access only when trunk on
Hold
4 = Outgoing access and access
when trunk on Hold
5 = Incoming and access when
trunk on Hold
6 = Incoming and outgoing ac-
cess
7 = Full access
Access Map 1 ~ 128 =
Trunk Ports 1~128 as-
signed with option 7 ac-
cess (incoming and
outgoing access and
access when trunk is
on Hold).
15-06-01 Trunk Access Map for Extensions - Trunk Ac-
cess Map Number
001 ~ 128 1
SL2100 ISSUE 1.0
1-570
Loop Keys
L
To Next Page
Loading...
