Reference of SRAM information via Web / PC Pro
The following data saved at SRAM is checked using PRG93-xx via Web/PC Pro.
This program is Read-Only.
For the PRG93-xx, the data can be referred by WebPro/PCPro/TelPro.
User Pro can not access to PRG93-xx.
The user level for which this function can be used is the following.
2 = IN (Installer Level)
3 = SA (System Administrator Level 1)
Program
No.
Program Name Input Data Default
93-01-01 - Day/Night mode 1 = Mode 1
2 = Mode 2
3 = Mode 3
4 = Mode 4
5 = Mode 5
6 = Mode 6
7 = Mode 7
8 = Mode 8
No Setting
93-02-01 - Set Automatic Transfer to Transfer 0 = Disable
1 = Enable
No Setting
93-02-02 - Trunk Port Disable by Service code 0 = Disable
1 = Enable
No Setting
93-03-01 - Call Forward-All/No Answer/BothRing 0 = Call Forwarding off
1 = Call Forwarding with Both
Ringing
2 = Call Forwarding when No An-
swer
3 = Call Forwarding All Call
No Setting
93-03-02 - Call Forwarding Destination for Both Ring, All
Call, No Answer
0 ~ 9,
, #, P, R, @
(Up to 36 digits)
No Setting
93-03-03 - Call Forward-Busy 0 = Call Forward-Off
1 = Call Forward-Busy or No an-
swer
2 = Call Forward-Busy
No Setting
93-03-04 - Call Forwarding Busy destination 0 ~ 9,
, #, P, R, @
(Up to 36 digits)
No Setting
93-03-05 - Call Forwarding – Follow-Me 0 = Disable
1 = Enable
No Setting
93-03-06 - Call Forwarding Follow-Me destination Extension Number (Up to 8 dig-
its)
No Setting
93-03-07 - Do Not Disturb 0 = No Setting
1 = DND External
2 = DND intercom
3 = DND Transfer
4 = DND All
No Setting
93-03-08 - Message Waiting (Set) Extension Number (Up to 8 dig-
its)
No Setting
93-03-09 - Message Waiting (Rec) Extension Number (Up to 8 dig-
its)
No Setting
93-03-10 - Alarm Clock 1 0 = Disable
1 = Enable
No Setting
93-03-11 - Preset time at Alarm 1 Time set in Alarm Clock 1.
When PRG93-03-11 is "0",
「
00
：
00
」
is indicated.
No Setting
93-03-12 - Alarm Clock 2 0 = Disable
1 = Enable
No Setting
SL2100 ISSUE 1.0
1-574
Maintenance
M
To Next Page
Loading...
