Type Incoming Feature Program Code Set By Mobile
Extension
Set to Mobile
Extension
Tandem Trunking 11-12-57 #8 Yes
Transfer into Conference 11-12-58 624 Yes
Set DND for Other Extension 11-14-03 629 Yes Yes
Cancel DND for Other Extension 11-14-04 630 Yes Yes
Set Wake Up Call for Own Extension 11-14-05 631 Yes
Cancel Wake Up Call for Own Extension 11-14-06 632 Yes
Set Wake Up Call for Other Extension 11-14-07 633 Yes Yes
Cancel Wake Up Call for Other Extension 11-14-08 634 Yes Yes
Set Room to Room Call Restriction 11-14-09 635 Yes Yes
Cancel Room to Room Call Restriction (Hotel) 11-14-10 636 Yes Yes
Change Toll Restriction Class for Other Exten-
sion
11-14-11 637 Yes Yes
Check-in 11-14-12 638 Yes Yes
Check-out 11-14-13 639 Yes Yes
Room Status Change for Own Extension 11-14-14 640 Yes
Room Status Change for Other Extension 11-14-15 641 Yes Yes
Room Status Output 11-14-16 642 Yes
Hotel Room Monitor 11-14-17 675 Yes Yes
Although some features may be available to the Mobile Extension, it may be advisable to disable them
in Class of Service. There are also features that should be disabled in any case.
The features to be disabled/not used for Mobile Extension include:
• ACD
• TAPI
• Analog Trunks
• Port Swap
• Hotline
• General Message
• Message Waiting
• Headset Mode for SLT
• Flexible Transfer/Virtual Loop Back
• Tandem Ringing
• Virtual extension key as Call Coverage Key for mobile extension
• Automatic Conversation Record for trunks
Caller ID Presented to the Mobile Extension for Type of Call
• Direct Internal Call - CPN of the Calling Phone is presented to the Mobile Extension.
• Direct Trunk Call with CID - Caller ID of incoming call is presented to the Mobile Extension
.
• Direct Trunk Call without CID - CPN of Mobile Extension is presented to the Mobile Extension.
• Transferred Trunk Call with CID -
- Transferred before inter-digit timeout - Caller ID of incoming call is presented to the Mobile
Extension
.
- Transferred after inter-digit timeout - CPN of the Transferring Phone is presented to the Mobile
Extension.
ISSUE 1.0
SL2100
Features and Specifications Manual 1-619
M
To Next Page
Loading...
