• After answering Callback, if the system does not receive a DTMF signal from the Mobile Extension
using PRG 20-18-01 (Default; 30 seconds), the system disconnects the call.
• The trunk user for SMDR for Callback is tied to the extension number of Mobile Extension.
• If the user calls a Mobile Extension port during while using the Callback to Mobile Phone feature,
the caller hears a busy tone.
Default Setting
No Mobile Extensions are configured.
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
Related Features
Abbreviated Dialing/Speed Dial
Caller ID
Call Forwarding
Direct Inward Dialing (DID)
Direct Inward Line (DIL)
Station Message Detail Recording
Guide to Feature Programming
Program
No.
Program Name Input Data Default
13-04-01 Speed Dialing Number and Name - Number Maximum of 36 digits (0 ~ 9,
,
#, @, P, R)
@ = Wait for Answer Supervision
- ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
No Setting
SL2100 ISSUE 1.0
1-628
Mobile Extension - Callback to Mobile Phone
M
To Next Page
Loading...
