Related Features
Automatic Route Selection
Caller ID
Direct Inward Dialing (DID)
ISDN Compatibility
Guide to Feature Programming
Program
No.
Program Name Input Data Default
10-51-01 PRI Selection of PRI -
PRI Selection
0 = PRI 0: PRI
14-01-01 Basic Trunk Data Setup - Trunk Name Up to 12 characters Trunk Port Number 1 =
Name Line 001
Trunk Port Number 2 =
Name Line 002
:
Trunk Port Number 128
= Name Line 128
25-07-01 System Timers for VRS/DISA - VRS/DISA Dial
Tone Time
0 ~ 64800 seconds 10 seconds
34-01-02 E&M Tie Line Basic Setup - Receive Dial Type for
E&M Tie Line
0 = DP
1 = DTMF
1
Loop Start Trunks
Program
No.
Program Name Input Data Default
14-04-01 Behind PBX Setup - Type of Connection 0 = Stand Alone (Trunk)
1 = Behind PBX (PBX)
3 = CTX assume 9
0
14-05-01 Trunk Group - Trunk Group Number Trunk Group Number = 0~50
Trunk Port 1~128 = Priority
1~128
Refer to Programming
Manual.
22-02-01 Incoming Call Trunk Setup - Trunk Service Type 0 = Normal
1 = VRS (second dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = Tie Line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID (DDI) Mode Switching
0
Operation
None
SL2100
ISSUE 1.0
1-632
Multiple Trunk Types
M
To Next Page
Loading...
