NEC SL2100 - Page 655

Program
No.
Program Name Input Data Default
20-63-08 Multi-Device Group Setup – Member Extension
Number 7
Maximum of eight digits
(Group 1 ~ 50)
No Setting
Operation
To Enable Multi-Device Group:
1. Press the Multi-Device Group key (751:#14).
• The Multi-Device Group key will light solid red.
- OR -
Press the Speaker Key or lift the Hand Set and dial the Multi-Device Support (ON) service code,
PRG11-11-75: No Setting (default).
• The Multi-Device Group key will light red and the display will show MDG >> Pilot or MDG >>
Member.
To Disable Multi-Device Group:
1. Press the Multi-Device Group key (751:#14).
• The Multi-Device Group key will go out.
- OR -
Press the Speaker Key or lift the Hand Set and dial the Multi-Device Support (Off service code,
PRG11-11-76: No Setting (default).
• The Multi-Device Group key go out and the display will look like a non-MDG member terminal.
ISSUE 1.0 SL2100
Features and Specifications Manual 1-641
M