NEC SL2100 - Page 668

Guide to Feature Programming
Program
No.
Program Name Input Data Default
15-02-60 Multiline Telephone Basic Data Setup - Soft Key/
Navigation key Mode
0 = Standard Mode
1 = Advanced Mode1
2 = Advanced Mode2
2
13-01-01 Speed Dialing Function Setup - Speed Dialing
Auto Outgoing Call Mode
0 = Trunk Outgoing Mode (Use
trunk group assigned in PRG
13-05.)
1 = Intercom Outgoing Mode
(Follow the system routing for the
trunk access code entered.)
0
13-01-02 Speed Dialing Function Setup - Station Speed
Dial
0 = Do not use
1 = Use
1
13-01-03 Speed Dialing Function Setup - Common Speed
Dial Table Size
0 ~ 1000
0 = No Common Speed Dialing
(No System Speed Dial)
900
13-02 Group Speed Dialing Bins - 0
13-03 Speed Dialing Group Assignment for Extensions - 1
13-04-01 Speed Dialing Number and Name - Number Maximum of 36 digits (0 ~ 9,
*
,
#, @, P, R)
@ = Wait for Answer Supervision
- ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
No Setting
13-04-02 Speed Dialing Number and Name - Name Maximum 12 Characters (Use di-
al pad to enter name)
No Setting
13-06-01 Station Speed Dial Number and Name - Speed
Dialing Data
- No Setting
15-01-01 Basic Extension Data Setup - Extension Name No Setting
15-02-13 Multiline Telephone Basic Data Setup - Redial
List Mode
0 = ICM/Trunk (Extension/Trunk
Mode)
1 = Trunk Mode
0
15-02-48 Multiline Telephone Basic Data Setup - Short
Ring Setup
0 = Disable
1 = Enable
0
20-07-04 Class of Service Options (Administrator Level) -
Storing Speed Dialing Entries
0 = Off (Deny)
1 = On
COS 1 ~ 15 = 1
20-08-03 Class of Service Options (Outgoing Call Service)
- System Speed Dialing
0 = Off (Deny)
1 = On
COS 01 ~ 15 = 1
20-08-04 Class of Service Options (Outgoing Call Service)
- Group Speed Dialing
0 = Off (Deny)
1 = On
COS 01 ~ 15 = 1
Operation
Following operation procedures are just for Example.
Navigation mode
Enter Navigation mode and save missed call to private phonebook.
<Program>
PRG 15-02-60: Advanced Mode1
SL2100
ISSUE 1.0
1-654
Navigation Key
N