NEC SL2100 - Page 680

Program
No.
Program Name Input Data Default
22-02-01 Incoming Call Trunk Setup - Trunk Service Type 0 = Normal
1 = VRS (second dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = Tie Line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID (DDI) Mode Switching
0
22-05-01 Incoming Trunk Ring Group Assignment - In-
coming Group Number
0 = No Setting
01 ~ 50 = Incoming Group
102 = VMI
103 = Centralized VM
1
22-08-01 DIL/IRG No Answer Destination - Incoming Ring
Group Number
0 = No Setting
01 ~ 50 = Incoming Group
102 = VMI
103 = Centralized VM
Group01 has 101, 102,
103, 104, 105, 106,
107, and 108 (First 8
ports ringing)
30-03-01 DSS Console Key Assignment - DSS Console
Key Assignment
09 = Night Mode Service key
Mode No. 1 ~ 8 or 0: toggle
The DSS keys 001 ~
060 of all DSS con-
soles = DSS/One-
Touch key 101 ~ 160
The DSS keys 061 ~
114 of all DSS con-
soles = No Setting
Operation
To activate Night Service by dialing codes:
1. At a Multiline Terminal, press Speaker key.
- OR-
At the Single Line Terminal, lift the handset.
2. Dial 718. To change a different group’s mode, dial 718 + the group number (01~04).
3. Dial the Night Service Code:
1 = Day 1 Mode
2 = Night 1 Mode
3 = Midnight 1 Mode
4 = Rest 1 Mode
5 = Day 2 Mode
6 = Night 2 Mode
7 = Midnight 2 Mode
8 = Rest 2 Mode
4. Press Speaker key or hang up.
To activate Night Service by using programmable keys:
1. Press the Night Service key (PRG 15-07-01 or SC 751: 09 + Mode code number below).
1 = Day 1 Mode
2 = Night 1 Mode
3 = Midnight 1 Mode
4 = Rest 1 Mode
5 = Day 2 Mode
6 = Night 2 Mode
7 = Midnight 2 Mode
8 = Rest 2 Mode
SL2100
ISSUE 1.0
1-666
Night Service
N