EasyManua.ls Logo

NEC SL2100 - Page 684

NEC SL2100
978 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Program
No.
Program Name Input Data Default
15-02-12 Multiline Telephone Basic Data Setup - Off-Hook
Ringing
0 = Muted Off-Hook Ringing
1 = No Off-Hook Ringing
3 = Beep in Speaker (SP)
4 = Beep in Handset (HS)
5 = Speaker and Handset Beep
5
15-07-01 Programmable Function Keys - Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
20-09-07 Class of Service Options (Incoming Call Service)
- Call Queuing
0 = Off (Calls are not queued.)
1 = On (Calls are queued.)
COS 01 ~ 15 = 0
20-13-05 Class of Service Options (Supplementary Serv-
ice) - Intercom Off-Hook Signaling
0 = Off (ICM off hook signaling
disabled.)
1 = On (ICM off hook signaling
enabled.)
COS 01 ~ 15 = 1
20-13-06 Class of Service Options (Supplementary Serv-
ice) - Automatic Off-Hook Signaling (Automatic
Override)
0 = Off (manually)
1 = On (automatically)
COS 01 ~ 15 = 1
20-13-34 Class of Service Options (Supplementary Serv-
ice) - Block Manual Off-Hook Signaling
0 = Off
1 = On
COS 01 ~ 15 = 0
20-18-06 Service Tone Timers - Interval of Call Waiting
Tone
1 ~ 64800 seconds 10
80-01-01 Service Tone Setup - Tone 39, Special Audible
Ring Busy Tone
0 ~ 255 (0 = Endless) Refer to Programming
Manual.
80-01-02 Service Tone Setup - Tone 39, Special Audible
Ring Busy Tone
0 ~ 33
(0 = No Tone)
(33 = Default Time Slot)
Refer to Programming
Manual.
Operation
To send Off-Hook signals to an extension busy on a call:
Your extension may send off-hook signals automatically.
1. Dial service code.
- OR -
Press the Off-Hook Signaling key (PRG 15-07 or SC751: 33).
You hear ringback.
To have your call voice-announce, dial 1.
Receiving Off-Hook Signaling on a Single Line Terminal while engaged on an internal
or external call:
1. When Off-Hook Signaling is heard in the receiver, press Flash key to answer the call. The first call
is placed on hold.
SL2100
ISSUE 1.0
1-670
Off-Hook Signaling
O

Table of Contents

Other manuals for NEC SL2100

Related product manuals