NEC SL2100 - Page 687

System Availability
Terminals
All Multiline Terminals and DSS Consoles
Required Component(s)
None
Related Features
Programmable Function Keys
Transfer
Guide to Feature Programming
Program
No.
Program Name Input Data Default
15-07-01 Programmable Function Keys - Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
11-11-17 Service Code Setup (for Setup/Entry Operation) -
Programmable Function Key Programming (3-
Digit Service Codes)
0~9,
*
, # Maximum of 8 digit 751
20-13-18 Class of Service Options (Supplementary Serv-
ice) - Programmable Function Key Programming
(General Level)
0 = Off
1 = On
COS 01 ~ 15 = 1
30-03-01 DSS Console Key Assignment The DSS keys 001 ~
060 of all DSS con-
soles = DSS/One-
Touch key 101 ~ 160.
The DSS keys 061 ~
114 of all DSS con-
soles = No Setting.
Operation
Programmable Function Keys
To define a Programmable Function Key as a One-Touch Key:
1. Dial the service code for Function Key Programming (PRG 11-11-17, 751 by default).
2. Press the key to be defined.
3. Dial 01 (DSS/One-Touch Key Operation).
4. For Direct Station Selection (Extension):
a. Dial extension number you want assigned to that key.
b. Press Hold key.
c. Press Speaker key.
ISSUE 1.0
SL2100
Features and Specifications Manual 1-673
O