Program
No.
Program Name Input Data Default
10-60-05 Audio Port Setup - External Speaker Channel 3 0 ~ 3
5 ~ 7
9 ~ 11
Each chassis can be set except
4th Slot (Slot No. 4,8,12).
0
15-07-01 Programmable Function Keys - Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
20-13-29 Class of Service Options (Supplementary Serv-
ice) - Paging Display
0 = Off
1 = On
COS 01 ~ 15 = 1
31-01-02 System Options for Internal/External Paging -
Page Announcement Duration
0 ~ 64800 seconds 1200 seconds
31-03-01 Internal Paging Group Settings - Internal Paging
Group Name
Up to 12 Characters Refer to the Program-
ming Manual for the
default values.
31-04-01 * External Paging Zone Group - Paging Group
Number
0 ~ 3 (0 = No setting, 1 ~ 3=
Group number)
Speaker 1 = 1 (Group
1)
Speaker 2 = 2 (Group
2)
Speaker 3 = 3 (Group
3)
31-05-01 Universal Night Answer/Ring Over Page - Univer-
sal Night Answer/Ring
0 = No Ringing (No)
1 = Ringing (Yes)
0
31-06-01 External Speaker Control - Broadcast Splash
Tone Before Paging (Paging Start Tone)
0 = No Tone (None)
1 = Splash Tone
2 = Chime Tone
2
31-06-02 External Speaker Control - Broadcast Splash
Tone After Paging (Paging End Time)
0 = No Tone (None)
1 = Splash Tone
2 = Chime Tone
2
31-06-04 External Speaker Control - CODEC Transmit
Gain Setup
1 ~ 57 (- 15.5 ~ + 12.5 dB) 32
31-07-01 Combined Paging Assignments - Internal Paging
Group Number
0 ~ 50 (0 = All Internal Paging) 1
31-08-01 Back Ground Music on External Paging - BGM 0 = BGM Prevented (No)
1 = BGM allowed (Yes)
0
Operation
To Page into an external zone:
1. Press the External Paging key (PRG 15-07 or SC 751: 19 for External Paging zones or 20 for
External All Call Paging).
ISSUE 1.0
SL2100
Features and Specifications Manual 1-679
P
To Next Page
Loading...
