Guide to Feature Programming
Program
No.
Program Name Input Data Default
11-10-20 Service Code Setup (for System Administrator) -
VRS - Record/Erase Message
0~9,
, # Maximum of 8 digit 616
11-12-20 Service Code Setup (for Service Access) - Exter-
nal Paging
0~9,
, # Maximum of 8 digit 703
20-07-13 Class of Service Options (Administrator Level) -
VRS Record (VRS Msg Operation)
0 = Off
1 = On
COS1 ~ 14/COS15 =
0/1
Operation
External VRS Messaging
To page into an external zone with VRS message:
1. Pick up the handset or press Speaker key at Multiline Terminal.
2. Dial 703 and
then the External Paging Zone code (1~3, 0 for all call).
3. Dial VRS message Number (001-100).
4. Make announcement.
5. Press Speaker key at Multiline Terminal or on-hook.
- OR -
Press the DSS/One Touch key programmed for External Paging.
To Program One Touch Key:
The following example shows how to program a One Touch key for External Paging zone 2 to play
VRS greeting number 099.
1. Press Speaker key.
2. Dial 751.
3. Press the Function key to be programmed.
4. Dial 0, 1 (Function Code for the DSS/One Touch key).
5. Dial 703,
, 2, 0, 9, 9.
6. Press Hold key.
7. Press Speaker key.
When using the Paging, External (VRS) feature, FC 20 (External All Call Paging code) cannot be
used as a programmable function key.
SL2100 ISSUE 1.0
1-682
Paging, External (VRS)
P
To Next Page
Loading...
