NEC SL2100 - Page 737

Guide to Feature Programming
Program
No.
Program Name Input Data Default
15-07-01 Programmable Function Keys - Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
20-08-07 Class of Service Options (Outgoing Call Service)
- Repeat Redial
0 = Off
1 = On
COS 01 ~ 15 = 1
21-08-01 Repeat Dial Setup - Repeat Redial Count 0 ~ 255 3
21-08-02 Repeat Dial Setup - Repeat Redial Interval Time 0 ~ 64800 seconds 60
21-08-03 Repeat Dial Setup - Repeat Dial Calling Timer 0 ~ 64800 seconds 30
21-08-04 Repeat Dial Setup - Time for Send Busy Tone for
ISDN Trunk
0 ~ 64800 seconds 0
Operation
To use Repeat Redial (if the outside party you call is unavailable or busy):
1. Place a trunk call.
Listen for busy tone or ring no answer.
2. Press the Repeat Redial key (PRG 15-07 or SC 751: 29).
The Repeat Redial key flashes while you wait for the system to redial.
3. Press Speaker key to hang up.
The system periodically redials the call.
4. Lift the handset when called party answers.
When using trunks with answer supervision the Repeat Redial feature automatically cancels.
To cancel Repeat Redial:
1. Press the Repeat Redial key (PRG 15-07 or SC 751: 29). (Also refer to Last Number Redial on
page 1-551.)
ISSUE 1.0
SL2100
Features and Specifications Manual 1-723
R