NEC SL2100 - Page 756

Guide to Feature Programming
Program
No.
Program Name Input Data Default
11-12-13 Service Code Setup (for Service Access) - Saved
Number Dial
0~9,
*
, # Maximum of 8 digit 715
11-12-18 Service Code Setup (for Service Access) - Clear
Saved Number Dialing Data
0~9,
*
, # Maximum of 8 digit 785
15-07-01 Programmable Function Keys - Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
Operation
To save the outside number you just dialed (maximum of 36 digits):
Use this feature before hanging up.
Multiline Terminal
1. Press the Save Number Dialed key (PRG 15-07 or SC 751: 30).
Single Line Terminal
1. Hookflash.
2. Dial 715.
To redial a saved number:
Multiline Terminal
1. Press an idle trunk line key.
This selects a specific trunk for the call.
2. Press the Save Number Dialed key (PRG 15-07 or SC 751: 30).
The stored number dials out.
- OR -
1. Press Speaker key.
2. Dial 715.
- OR -
Press the Save Number Dialed key (PRG 15-07 or SC 751: 30).
Save Number Dialed automatically selects a trunk from the same group as your original call.
The stored number dials out.
Single Line Terminal
1. Go off-hook.
2. Dial 715.
SL2100
ISSUE 1.0
1-742
Save Number Dialed
S