Program
No.
Program Name Input Data Default
15-18-02 Virtual Extension Key Enhanced Options - Dis-
play mode when placing a call on Virtual Exten-
sion Key
0 = Secondary Extension Name
1 = Actual Station Name
0
20-04-03 System Options for Virtual Extensions - Call
Coverage Delay Interval
0 ~ 64800 seconds 10
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
20-07-10 Class of Service Options (Administrator Level) -
Programmable Function Key Programming (Ap-
pearance Level)
0 = Off
1 = On
COS 1 ~ 15 = 1
20-10-08 Class of Service Options (Answer Service) - Vir-
tual Extension Off-Hook Answer
0 = Off (Ringing Line Preference
Disabled)
1 = On (Ringing Line Preference
Enabled)
COS 01 ~ 15 = 1
20-13-27 Class of Service Options (Supplementary Serv-
ice) - Busy on Seizing Virtual Extension
0 = Off
1 = On
COS 01 ~ 15 = 1
21-01-15 System Options for Outgoing Calls - Outgoing
Disable on Incoming Line (Toll Restriction)
0 = Disable (Off)
1 = Enable (On)
1
23-04-01 Ringing Line Preference for Virtual Extensions -
Extension Group Number
0 ~ 50
(0 = No Setting)
0
Operation
To answer a call ringing a SIE key:
1. Press the flashing SIE key.
To program a SIE key on a phone:
1. Press Speaker key.
2. Dial 752.
3. Press the key you want to program.
4. Dial
03.
5. Dial the number of the extension you want to appear on the key.
6. Press Hold key once for Immediate Ring, (or skip to step 8 for Delayed Ring).
7. Dial the mode number in which the key rings.
8. Press Hold key again for Delayed Ring, (or skip to step 10).
9. Dial the mode number in which the key delays ringing.
10. Press Speaker key.
SL2100
ISSUE 1.0
1-746
Secondary Incoming Extension
S
To Next Page
Loading...
