NEC SL2100 - Page 783

Program
No.
Program Name Input Data Default
15-07-01 Programmable Function Keys - Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
Operation
To place a Serial Call to a co-worker:
1. Place or answer a call.
2. Press Hold or Transfer key.
3. Dial co-worker’s extension number.
Co-worker must lift the handset to respond to your announcement.
4. Press the Serial Call key (PRG 15-07 or SC 751: 43).
- OR -
5. Press Transfer key if PRG 15-02-05 is set to Call Back (Serial Call).
6. When MLT Display shows WAIT TRF extension can hang up.
When your co-worker hangs up the call, the system makes an automatic live transfer back to your
extension.
ISSUE 1.0 SL2100
Features and Specifications Manual 1-769
S