• If station A calls Station B, and station A puts station B on hold and then calls station C, station C
cannot transfer the call.
• A transferred call to an extension will not follow the extensions distinctive ring pattern. A transferred
call will follow the pattern assigned in PRG 20-15-09.
Default Settings
Enabled
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
Related Features
Barge-In
Call Waiting/Camp-On
Caller ID
Call Forwarding
Conference
Meet Me Paging Transfer
One-Touch Calling
Quick Transfer to Voice Mail
Serial Call
Guide to Feature Programming
Program
No.
Program Name Input Data Default
11-12-58 Service Code Setup (for Service Access) - Trans-
fer Into Conference
0~9,
, # Maximum of 8 digit 624
11-15-09 Service Code Setup, Administrative (for Special
Access) - Transfer to Incoming Ring Group
0~9,
, # Maximum of 8 digit No Setting
15-02-05 Multiline Telephone Basic Data Setup - Transfer
Key Operation Mode
0 = Transfer
1 = Serial Call (call back)
2 = Hook (Flash)
0
SL2100 ISSUE 1.0
1-838
Transfer
T
To Next Page
Loading...
