NEC SL2100 - Page 896

System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
Related Features
Call Waiting/Camp-On
Call Arrival (CAR) Keys
Secondary Incoming Extension
Guide to Feature Programming
The programs listed below indicate the most commonly used programs required for this feature. The
programs are listed in the order that the installer should follow. Refer to the PCPro wizards for further
detailed programming.
• When a * is listed next to the Program Number it indicates a program that MUST be set (from a
default state) for this feature to be enabled.
Program
No.
Program Name Input Data Default
11-04-01 * Virtual Extension Numbering - Extension Num-
ber
Dial (Up to 8 digits) All Virtual Extension
Port = No Setting
15-02-02 Multiline Telephone Basic Data Setup - Trunk
Ring Tone
1 = High (2W Digital/IP Multiline
Terminal)
2 = Medium (2W Digital/IP Multi-
line Terminal)
3 = Low (2W Digital/IP Multiline
Terminal)
4 = Melody 1 (2W Digital/IP Mul-
tiline Terminal)
5 = Melody 2 (2W Digital/IP Mul-
tiline Terminal)
6 = Melody 3 (2W Digital/IP Mul-
tiline Terminal)
7 = Melody 4 (2W Digital/IP Mul-
tiline Terminal)
8 = Melody 5 (2W Digital/IP Mul-
tiline Terminal)
2
SL2100 ISSUE 1.0
1-882
Virtual Extensions
V