Program PRG 45-01-15
(0 = Fixed)
PRG 45-01-17
(1=Yes or 0=No)
PRG 45-01-15
(1 = Program)
PRG 45-01-17
(1=Yes)
PRG 45-01-15
(1=Program)
PRG 45-01-17
(0=No)
Description
45-04-07 - Remote
Logon
Up to four digits
Default not as-
signed
6TTT Up to four digits + TTT Up to four digits + TTT Remote Log-on
• External call to
Voice Mail from
Trunk TTT.
• Play welcome
greeting and con-
nect user to prompt.
45-04-08 - Conver-
sation Recording
Up to four digits
Default not as-
signed
8NNN Up to four digits + NNN Up to four digits + NNN Conversation Record-
ing
• Record a message
to be placed in
voice mail box of
extension NNN.
45-04-09 - Clear
Down String
Up to four digits
Default not as-
signed
9999 Up to four digits Up to four digits Clear down string.
• Terminate
= If leading digits are blanks, nothing will be sent to the Analog VM as integration.
Conditions
• Ring Group calls do not follow extension call forwarding to voice mail.
• Only one Voice Mail system can be installed in an SL2100 system (Analog or Digital, but not both in
same system). This restriction is because only one Department Group can be assigned for Voice
Mail.
• If installing an Analog Voice Mail System, any Analog station port (SLT port) can be assigned to
support the Analog Voice Mail system.
• If installing a InMail system (In-Skin product), an Analog station port (SLT port) can be assigned to
support the sending of DTMF tones and Disconnect Signal to support a Fax server or other like
products.
• When using Programmed (PRG 45-01-15 = 1) integration and PRG 45-04-XX is blank, no trailing
digits are sent. You can allow only the trailing digits to be sent by setting PRG 45-05-XX to 1.
• Stutter Dial Tone is supported to Single Line Terminals for Voice Mail Message Waiting.
Default Settings
Disabled
System Availability
Terminals
All Terminals
Required Component(s)
or 082U-B1
008U-B1
ISSUE 1.0
SL2100
Features and Specifications Manual 1-889
V
To Next Page
Loading...
