NEC SL2100 - Page 920

3. Enter the Caller ID Number.
You can clear the digits entered by pressing Exit key.
VRS INCOM CID
123
(2W Digital/IP Multiline Terminal)
4. Press Hold.
ABB 0005
123
(2W Digital/IP Multiline Terminal)
5. Press Hold. You can set Name (PRG 13-04-02).
ABB 0005
-
(2W Digital/IP Multiline Terminal)
6. Press Hold and Enter the Transfer Mode 0 ~ 3 (PRG13-04-03).
TRF0 = Not defined
TRF1 = Internal Dial
TRF2 = IRG
TRG3 = Remote Monitor
ABB0005
TRF Mode(0-3)?0-
(2W Digital/IP Multiline Terminal)
7. Press 0 and RI Set will be canceled.
Set ABB
Cancel RI
(2W Digital/IP Multiline Terminal)
8. Press Speaker.
SL2100
ISSUE 1.0
1-906
Voice/Melody Ringing by VM
V