NetApp E Series Maintaining

Starting configuration Ending configuration Feature Activation
Code
Controller
submodel ID
HIC ports Controller
submodel ID
HIC ports
518 FC 516 NVMe/FC
or
NVMe/RoCE
UH5-H95-Z9Z58
517 NVMe/FC
or
NVMe/IB
XH7-195-ZBGJC
519 FC-PTL FHA-K95-ZCXX0
520 iSER/IB JHC-595-ZDE3X
521 SRP/IB 0HF-095-ZFVFN
519 FC-PTL 516 NVMe/FC or
NVMe/RoCE
YHH-895-ZGCXS
517 NVMe/FC or
NVMe/IB
2HK-R95-ZHT83
518 FC 1HM-BA5-ZJALA
520 iSER/IB YHP-UA5-ZKRXA
521 SRP/IB MHR-EA5-ZL83V
520 iSER/IB 516 NVMe/FC or
NVMe/RoCE
HHU-XA5-ZNPLT
517 NVMe/FC or
NVMe/IB
YHW-HA5-Z07QK
518 FC WHZ-1A5-ZPN4U
519 FC/PTL 7H2-KA5-ZR5C3
521 SRP 3H5-4A5-ZSLVX
521 SRP/IB 516 NVMe/FC or
NVMe/RoCE
1H7-NA5-ZT31W
517 NVMe/FC or
NVMe/IB
XHA-7A5-ZVJGC
518 FC KHC-QA5-ZW1P3
519 FC/PTL CHE-AA5-ZXH2F
520 iSER/IB SHH-TA5-ZZYHS
Note: If your controller submodel ID is not listed, contact NetApp Support .
4. In System Manager, locate the Feature Enable Identifier.
a. Go to Settings > System.
b. Scroll down to Add-ons.
c. Under Change Feature Pack, locate the Feature Enable Identifier.
d. Copy and paste this 32-digit number to a text file.
Maintaining EF300 and EF600 Hardware
77
Host port protocol conversion

NetApp E Series Specifications

General

Form Factor	2U, 4U
Drive Types	SSD
Host Interface	SAS, iSCSI, FC, IB
RAID Levels	RAID 0, 1, 5, 6, 10
Operating System Compatibility	Windows, Linux, VMware
Management Software	SANtricity