NetApp E Series Maintaining

e. If there is no recovery guru present or if following the recovery guru steps the volumes are
still not returned to their preferred owners, contact support.
6. Collect support data for your storage array using SANtricity System Manager.
a. Select Support > Support Center > Diagnostics.
b. Select Collect Support Data.
c. Click Collect.
The file is saved in the Downloads folder for your browser with the name support-data.7z.
Result
The process of adding a SAS expansion card in your storage array is complete. You can resume
normal operations.
To cable your SAS expansion see Cabling E-Series hardware for instructions.
Maintaining EF300 and EF600 Hardware 89
SAS expansion cards

NetApp E Series Specifications

General

Form Factor	2U, 4U
Drive Types	SSD
Host Interface	SAS, iSCSI, FC, IB
RAID Levels	RAID 0, 1, 5, 6, 10
Operating System Compatibility	Windows, Linux, VMware
Management Software	SANtricity