Configure Advanced Features
111
AC1900, N900, and N450 WiFi Cable Data Gateways
View or Change WPS Settings
You can control how WPS functions on the cable data gateway. Use caution if you change
the WPS settings.
Note: For information about how to use WPS to add WiFi devices and other
equipment to your WiFi network, see Join the WiFi Network of the
WiFi Cable Data Gateway on page 26 and Use the WPS Wizard to
Add a Device to the WiFi Network on page 52.
To specify WPS settings:
1. On your computer
, launch an Internet browser such as Mozilla Firefox or Microsoft
Internet Explorer.
2. In the address field of your browser
, enter http://routerlogin.net.
You are prompted to enter a user name and password.
3. T
ype admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADV
ANCED > Advanced Setup > Wireless Settings.
The Wireless Settings screen displays (that is, the screen to configure advanced
settings).
To Next Page
Loading...
Need help?
General