Manage and Monitor Your Network
86
AC1900, N900, and N450 WiFi Cable Data Gateways
7. To release the connection, click the Release button.
The connection with your cable service provider is shut down, as is your Internet
connection.
8. To renew the connection, click the Renew button.
The connection with your cable service provider is reestablished, as is your Internet
connection. If a DHCP connection with your cable service provider exists, the cable data
gateway receives a new DHCP lease and might receive a new IP address.
9. Click the Close Window button.
The pop-up screen closes.
View the WiFi Cable Data Gateway Cable Initialization
You can track the initialization procedure of the cable data gateway and get details about the
downstream and upstream cable channels. The time is displayed after the cable data
gateway is initialized.
The cable data gateway automatically goes through the following steps in the provisioning
process:
1. Scans and locks the downstream frequency and then ranges the upstream channels.
2. Obtains a WAN IP address for the cable data gateway.
3. Connects to the Internet.
To view the status of the cable data gateway initialization:
1. On your computer, launch an Internet browser such as Mozilla Firefox or Microsoft
Internet Explorer.
2. In the address field of your browser, enter http://routerlogin.net.
You are prompted to enter a user name and password.
3. Type admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
4. Click the OK button.
The BASIC Home screen displays.
5. Select Cable Connection.
The Cable Connection screen displays.
To Next Page
Loading...
Need help?
General