Manage and Monitor Your Network
85
AC1900, N900, and N450 WiFi Cable Data Gateways
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADV
ANCED > ADVANCED Home.
The ADVANCED Home screen displays.
6. In the Internet Port pane, click the Connection Status button.
The Connection Status pop-up screen displays.
If this screen does not display, your web browser might be blocking pop-ups. If it is,
change the browser settings to allow pop-ups. The cable data gateway could also block
pop-ups. For information about allowing pop-ups on the cable data gateway, see Manage
Firewall, Web, and NAT ALG Security on page 73.
The following table describes the fields of the Connection Status pop-up screen.
Field Description
IP Address The IP address that is assigned by the cable service provider to the cable data
gateway.
Subnet Mask The subnet mask that is assigned by the cable service provider to the cable data
gateway.
Default Gateway The IP address of the default gateway of the cable service provider that the cable
data gateway communicates with.
DHCP Server The IP address of the Dynamic Host Configuration Protocol (DHCP) server of the
cable service provider that provides translation of network names to IP addresses.
DNS Server The IP address of the Domain Name Service (DNS) server of the cable service
provider that provides translation of network names to IP addresses.
Lease Obtained The day and time that the lease was obtained.
Lease Expires The day and time that the lease expires.