Manage and Monitor Your Network
82
AC1900, N900, and N450 WiFi Cable Data Gateways
View the Traffic Statistics
You can view the traffic statistics for the ports of the cable data gateway, change the polling
frequency, and stop traffic polling.
To view the traffic statistics for the ports of the cable data gateway:
1. On your computer, launch an Internet browser such as Mozilla Firefox or Microsoft
Internet Explorer.
2. In the address field of your browser, enter http://routerlogin.net.
You are prompted to enter a user name and password.
3. Type admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADVANCED > ADVANCED Home.
The ADVANCED Home screen displays.
Wireless isolation By default, WiFi isolation is off. You cannot enable WiFi isolation for the guest
WiFi network.
Allow guest to access My
Local Network
Displays whether guests that connect to the 2.4 GHz band of the guest WiFi
network are allowed access to devices on the main WiFi network and devices
that are attached through the LAN ports.
Guest Network (5GHz)
The settings of the 5 GHz band of the guest WiFi network. For information about how to configure the WiFi
settings, see
Enable and Configure the Guest WiFi Network on page 36.
Name (SSID) The network name of the 5 GHz band of the guest WiFi network. By default, the
name is NETGEAR_GUEST_0.
Wireless AP Displays whether the 5 GHz band of the guest WiFi network is enabled.
Note: The 5 GHz band for the main WiFi network can override the 5 GHz band
for the guest WiFi network. That is, if you disable the 5 GHz band for the main
network, the entire 5 GHz radio is disabled, which also disables the 5 GHz band
for the guest network.
Broadcast Name Displays whether the 5 GHz band of the guest WiFi network broadcasts its
SSID.
Wireless isolation By default, WiFi isolation is off. You cannot enable WiFi isolation for the guest
WiFi network.
Allow guest to access My
Local Network
Displays whether guests that connect to the 5 GHz band of the guest WiFi
network are allowed access to devices on the main WiFi network and devices
that are attached through the LAN ports.
Field Description
To Next Page
Loading...
Need help?
General