Configure Advanced Features
128
AC1900, N900, and N450 WiFi Cable Data Gateways
Note: If you use applications such as multiplayer gaming, peer-to-peer
connections, real-time communications such as instant messaging, or
remote assistance, keep Universal Plug and Play (UPnP) enabled for
ease of configuration. For more information, see
Manage Universal
Plug and Play on page 143.
Manage Port Triggering Services and Applications
To configure port triggering services, you must know which inbound ports the service or
application uses and the number of the outbound port that triggers the opening of the inbound
ports. You can usually find this information by contacting the publisher of the service or
application or through user groups or news groups on the Internet.
Add a Service or Application for Port Triggering
The cable data gateway does not provide default services or applications for port triggering.
You must add each service and application for which you want to set up port triggering.
To add a port triggering service or application and enable or schedule port triggering:
1. On your computer, launch an Internet browser such as Mozilla Firefox or Microsoft
Internet Explorer.
2. In the address field of your browser, enter http://routerlogin.net.
You are prompted to enter a user name and password.
3. Type admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADVANCED > Advanced Setup > Port Forwarding / Port Triggering.
The Port Forwarding / Port Triggering screen displays.
6. Select the Port Triggering radio button.
The screen adjusts.
To Next Page
Loading...
Need help?
General