Manage and Monitor Your Network
90
AC1900, N900, and N450 WiFi Cable Data Gateways
View WiFi Access Points in Your Environment
You can view the WiFi access points (APs) that are broadcasting WiFi networks in your
environment. These are APs other than the cable data gateway. For each WiFi network, the
security level and the signal strength are displayed.
To view the WiFi APs in your environment:
1. On your computer
, launch an Internet browser such as Mozilla Firefox or Microsoft
Internet Explorer.
2. In the address field of your browser
, enter http://routerlogin.net.
You are prompted to enter a user name and password.
3. T
ype admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADV
ANCED > Advanced Setup > Wireless AP.
The Wireless AP screen displays.
By default, the screen displays the APs in the 2.4 GHz band.
6. T
o display the APs in the 5 GHz band, select the 5GHz a/n radio button.
The screen displays the APs in the 5 GHz band.
7. T
o refresh the screen, click the Refresh button.
The information onscreen is updated.
To Next Page
Loading...
Need help?
General