98
7
7. Share USB Drives Attached to the
Cable Data Gateway
This chapter describes how to access and configure a USB storage drive attached to your cable
data gateway. The USB port on the cable data gateway can be used only to connect USB
storage devices like flash drives or hard drives. Do not connect computers, USB modems, CD
drives, or DVD drives to the cable data gateway USB port.
This chapter contains the following sections:
• USB Drive Requirements
• Access a USB Drive on the Network
• Back Up Windows Computers with ReadySHARE Vault
• Specify the Method for Accessing the USB Drive
• Specify the Method for Accessing the USB Drive
• View Network Folders on a USB Drive
• Add a Network Folder on a USB Drive
• Change a Network Folder, Including Read and Write Access, on a USB Drive
• Safely Remove a USB Drive
• Enable the Media Server
Note: For more information about ReadySHARE features, visit
www.netgear.com/readyshare.
To Next Page
Loading...
Need help?
General