Configure Advanced Features
133
AC1900, N900, and N450 WiFi Cable Data Gateways
Manage the Port Triggering Time-Out Period
By default, port triggering is enabled with a time-out period of 10 minutes.
The time-out value controls the inactivity timer for the designated inbound ports. The inbound
ports close when the inactivity time expires.
This closure is required because the cable data
gateway cannot detect when the application terminates.
If you disable port triggering after you configured port triggering services, the services are
retained even though they are not used.
To change the port triggering time-out period:
1. On your computer
, launch an Internet browser such as Mozilla Firefox or Microsoft
Internet Explorer.
2. In the address field of your browser
, enter http://routerlogin.net.
You are prompted to enter a user name and password.
3. T
ype admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADV
ANCED > Advanced Setup > Port Forwarding / Port Triggering.
The Port Forwarding / Port Triggering screen displays.
6. Select the Port T
riggering radio button.
The screen adjusts.
To Next Page
Loading...
Need help?
General