Configure Advanced Features
132
AC1900, N900, and N450 WiFi Cable Data Gateways
If you did not yet personalize your password, type password for the password.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADVANCED > Advanced Setup > Port Forwarding / Port Triggering.
The Port Forwarding / Port Triggering screen displays.
6. Select the Port Triggering radio button.
The screen adjusts.
7. In the table, clear the Enable check box for the service or application that you want to
disable.
8. Click the Apply button.
The service or application remains in the Port Triggering Portmap Table but is disabled.
Remove a Service for Port Triggering
You can remove a service or application that you no longer need for port triggering.
To remove a port triggering service or application:
1. On your computer, launch an Internet browser such as Mozilla Firefox or Microsoft
Internet Explorer.
2. In the address field of your browser, enter http://routerlogin.net.
You are prompted to enter a user name and password.
3. Type admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADVANCED > Advanced Setup > Port Forwarding / Port Triggering.
The Port Forwarding / Port Triggering screen displays.
6. Select the Port Triggering radio button.
The screen adjusts.
7. In the table, select the radio button to the left of the service that you want to remove.
8. Click the Delete Service button.
The service or application is removed from the Port Triggering Portmap Table.
To Next Page
Loading...
Need help?
General