NETGEAR CG4500BDv2 User Manual

Configure Advanced Features
148
AC1900, N900, and N450 WiFi Cable Data Gateways
You are prompted to enter a user name and password.
3. T
ype admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADV
ANCED > Advanced Setup > NTP.
The NTP screen displays.
By default, the Enable NTP check box is cleared and NTP is disabled.
6. Select the Enable NTP check box.
You can either keep the default NTP servers or configure one or more custom NTP
servers.
7. T
o configure custom NTP servers:
• In the Server 1 field, enter the IP address or Dynamic DNS name for the first NTP
server
.
The first default NTP server is clock.via.net.
• In the Server 2 field, enter the IP address or Dynamic DNS name for the second NTP
server
.
The second default NTP server is ntp.nasa.org.
• In the Server 3 field, enter the IP address or Dynamic DNS name for the third NTP
server
.
The third default NTP server is tick.ucla.edu.

NETGEAR CG4500BDv2 Specifications

General

Brand	NETGEAR
Model	CG4500BDv2
Category	Gateway
Language	English