Manage Internet, WAN, and LAN Settings and Use the WPS Wizard
54
AC1900, N900, and N450 WiFi Cable Data Gateways
By default, the Push Button (recommended) radio button is selected.
8. Either click the
button onscreen or press the WPS button on the front panel of the
cable data gateway.
For two minutes, the cable data gateway attempts to find the WiFi device (that is, the
client) that you want to join the cable data gateway’s main WiFi network.
During this time, the WPS LED on the front panel of the cable data gateway blinks green.
9. Within two minutes, go to the WiFi device and press its WPS button to join the cable data
gateway’
s main WiFi network without entering a password.
After the cable data gateway establishes a WPS connection, the LED lights solid green
and the
Add WPS Client screen displays a confirmation message.
10. To verify that the WiFi device is connected to the cable data gateway’s main WiFi network,
select BASIC > Network Map.
The WiFi device displays onscreen.
To Next Page
Loading...
Need help?
General