Manage the WiFi Network Settings
72
N600 and AC750 WiFi DSL Modem Routers
IMPORTANT:
The WiFi mode of the guest WiFi network depends on the WiFi
mode of the main WiFi network. For you to be able to configure
WEP in the guest WiFi network, first configure the mode for the
main WiFi network as Up to 54 Mbps. For information about
configuring the WiFi mode, see View or Change the Basic WiFi
Settings on page 56.
To configure WEP security for the guest WiFi network:
1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. In the address field of your browser
, enter http://routerlogin.net.
The login screen displays.
3. T
ype admin
for the user name and type your password.
If you did not yet personalize your password, type password
for the password.
4. Click the OK button.
The BASIC Home screen displays.
5. Select BASIC > Guest Network.
The Guest Network Settings screen displays.
6. In the Security Options section, select the WEP radio button.
7. From the Authentication Type menu in the Security Encryption (WEP) section, select one
of the following types:
• Shared Key. Clients can use only Shared Key authentication.
• Automatic. Clients can use either Open System or Shared Key authentication.
To Next Page
Loading...
Need help?
General
