Wireless Settings
32
N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition
Manual Method
To add clients manually:
1. Open the software that manages your wireless connections on the wireless device
(laptop computer, gaming device, iPhone) that you want to connect to your wireless
modem router. This software scans for all wireless networks in your area.
2. Look for your network and select it. If you did not change the name of your network during
the setup process, look for the default WiFi network name (SSID) and select it. The default
SSID is located on the product label on the bottom of the wireless modem router.
3. Enter the wireless modem router passphrase, and click Connect. The default wireless
modem router passphrase is located on the product label on the bottom of the wireless
modem router.
4. Repeat steps 1–3 to add other wireless devices.
Wi-Fi Protected Setup (WPS) Method
Wi-Fi Protected Setup (WPS) is a standard that lets you easily join a secure wireless network
with WPA or WPA2 wireless security. The wireless modem router automatically sets security
for each computer or device that uses WPS to join the wireless network. To use WPS, make
sure that your wireless devices are Wi-Fi certified and support WPS. NETGEAR products
that use WPS call it Push 'N' Connect.
1
Note: If the SSID changes each time you add a WPS client, the Keep
Existing Wireless Settings check box on the Advanced Wireless
Settings screen has been cleared. See Configure WPS Settings on
page 86 for more information about this setting.
You can use a WPS button or the wireless modem router interface method to add wireless
computers and devices to your wireless network.
WPS Button Method
To add clients using the WPS button:
1. Press the
WPS button on the wireless modem router front panel.
2. Within 2 minutes, press the WPS button on your wireless computer or device, or follow the
WPS instructions that came with the computer. The device is now connected to your
wireless modem router.
3. Repeat steps 1–2 to add other WPS wireless computers or devices.
1. For a list of other Wi-Fi-certified products available from NETGEAR, go to http://www.wi-fi.org.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
