EasyManuals Logo

NETGEAR DGN2200M User Manual

NETGEAR DGN2200M
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #80 background imageLoading...
Page #80 background image
Advanced Configuration
80
N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition
Under Advanced in the main menu, select LAN Setup.
Table 12. LAN Setup
Setting Description
Device Name This is a user-friendly name of the router. You can see this name for
the router in Network Explorer on Windows systems.
IP Address This is the LAN IP address of the wireless modem router.
IP Subnet Mask This is the LAN subnet mask of the wireless modem router.
Combined with the IP address, the IP subnet mask allows a device to
know which other addresses are local to it, and which need to be
reached through a gateway or wireless modem router.
Use Router as DHCP Server See the following section, Configure DHCP.
Address Reservation See Configure Reserved IP Addresses on page 81.
Configure DHCP
By default, the wireless modem router functions as a Dynamic Host Configuration Protocol
(DHCP) server, allowing it to assign IP, DNS server, and default gateway addresses to all
computers connected to the wireless modem router’s LAN. The assigned default gateway
address is the LAN address of the router. IP addresses are assigned to the attached
computers from a pool of addresses specified in this screen. Each pool address is tested
before it is assigned to avoid duplicate addresses on the LAN.
For most applications, the default DHCP and TCP/IP settings of the router are satisfactory.

Table of Contents

Other manuals for NETGEAR DGN2200M

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR DGN2200M and is the answer not in the manual?

NETGEAR DGN2200M Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 4 (802.11n)
WLAN data transfer rate (max)300 Mbit/s
Bandwidth2.4 GHz
Security featuresIDS, DoS
Dimensions (WxDxH)173 x 128 x 33 mm
Minimum system requirementsIE 5.0+
Compatible operating systemsWindows 7 Windows Vista Windows XP Windows 2000 Mac OS
WLAN data transfer rates supported11, 54, 150, 300 Mbit/s
DHCP client-
Supported network protocolsTCP/IP, DNS
Antennas quantity2
Ethernet LAN (RJ-45) ports4
Security algorithmsWEP, WPA, WPA-PSK, WPA2, WPA2-PSK
CertificationCEC, RoHS, WEEE
Cables includedPhone (RJ-11), USB
Product colorBlack
LED indicatorsLAN, Power, USB, WLAN, Y
Weight and Dimensions IconWeight and Dimensions
Weight300 g

Related product manuals