NETGEAR DGN2200M User Manual

Internet Configuration
8
N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition
Hardware Features
This section acquaints you with the physical aspects of your N300 Wireless ADSL2+ Modem
Router.
Router Stand
Since the router is a vertical-only device, use the stand to position your wireless modem
router upright.
 To assemble the router and its stand:
1. Insert the tabs of the stand into the slot on the bottom of your router.
2. Place your router near an AC power outlet in a location where you can connect cables as
needed for your home network.
If you are planning to connect to the Internet using mobile broadband, the router needs to
be located where you can receive a strong mobile broadband signal while indoors.
To mount the router to a wall, see Wall-Mounting on page 114.
For additional considerations on router placement, see Position Your Wireless Router on
page 13.

NETGEAR DGN2200M Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
WLAN data transfer rate (max)	300 Mbit/s
Bandwidth	2.4 GHz
Security features	IDS, DoS
Dimensions (WxDxH)	173 x 128 x 33 mm
Minimum system requirements	IE 5.0+
Compatible operating systems	Windows 7 Windows Vista Windows XP Windows 2000 Mac OS
WLAN data transfer rates supported	11, 54, 150, 300 Mbit/s
DHCP client	-
Supported network protocols	TCP/IP, DNS
Antennas quantity	2
Ethernet LAN (RJ-45) ports	4
Security algorithms	WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Certification	CEC, RoHS, WEEE
Cables included	Phone (RJ-11), USB
Product color	Black
LED indicators	LAN, Power, USB, WLAN, Y

Weight and Dimensions

Weight	300 g