NETGEAR DGN2200M User Manual

Troubleshooting
101
N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition
Basic Functioning
After you turn on power to the router, the following sequence of events should occur:
1. When power is first applied, verify that the Power LED is on.
2. After approximately 10 seconds, verify the following:
• The LAN Ports LEDs are lit for any local ports that are connected.
• The DSL LED is lit.
If the DSL link LED is lit, a link has been established to the connected device. If a LAN
port is connected to a 100 Mbps device, verify that the port’s LED is green. If the port is
10 Mbps, the LED is amber.
If any of these conditions does not occur, see the appropriate following section.
Welcome Screen Displays instead of Router Main Menu
This situation can occur if the CD Setup Wizard does not finish successfully; the unit stays in
Wizard Mode. If the Welcome screen displays instead of the main menu when you try to go to
the Internet or log in to the wireless modem router, you can bypass the wizard using one of
the following methods:
• Log in to the wireless modem router at http://routerlogin.com/basicsetting.htm.
• Reset the wireless modem router to factory defaults to take the router out of Wizard Mode
altogether.
Troubleshoot with the LEDs
After you turn on power to the wireless modem router, the following sequence of events
should occur:
1. When power is first applied, verify that the Power LED is on.
2. After approximately 10 seconds, verify that:
• The Power LED is green.
• The LAN Ports LEDs are lit for any local ports that are connected. If a LAN port is
connected to a 100 Mbps device, verify that the port’s LED is green. If the port is 10
Mbps, the LED is amber.
• The DSL LED is lit, indicating that a link has been established to the connected
device.
• The WiFi LED is lit.

NETGEAR DGN2200M Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
WLAN data transfer rate (max)	300 Mbit/s
Bandwidth	2.4 GHz
Security features	IDS, DoS
Dimensions (WxDxH)	173 x 128 x 33 mm
Minimum system requirements	IE 5.0+
Compatible operating systems	Windows 7 Windows Vista Windows XP Windows 2000 Mac OS
WLAN data transfer rates supported	11, 54, 150, 300 Mbit/s
DHCP client	-
Supported network protocols	TCP/IP, DNS
Antennas quantity	2
Ethernet LAN (RJ-45) ports	4
Security algorithms	WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Certification	CEC, RoHS, WEEE
Cables included	Phone (RJ-11), USB
Product color	Black
LED indicators	LAN, Power, USB, WLAN, Y

Weight and Dimensions

Weight	300 g