Internet Configuration
17
N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition
Log In to Your Wireless-N Modem Router
When you first connect to your wireless modem router during installation, a Setup Wizard
displays. For help using the Setup Wizard to configure your Internet and wireless network,
see the N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition Installation
Guide.
After the initial configuration, you can log in to the wireless modem router to view or change
its settings, and to access the Knowledge Base and documentation.
Note: Your computer needs to be configured for DHCP.
When you have logged in, if you do not click Logout, the wireless modem router waits for 5
minutes after no activity before it automatically logs you out.
To log in to the wireless modem router:
1. Type http://www.routerlogin.net in the address field of your browser, and then press
Enter or Return. A login window displays:
2. Enter admin for the user name and your password (or the default, password). For
information about how to change the password, see Change the Built-In Password on
page 42.
Note: If you changed your password and do not remember what it is, you
can restore the wireless modem router to its factory settings. See
Factory Default Configuration on page 112.
3. If the router has not been configured, the Smart Wizard screen displays. After the router has
been configured, one of the following screens displays:
• Firmware Upgrade Assistant screen. After initial setup, the Firmware Upgrade
Assistant screen displays unless the Check for Updated Firmware Upon Log-in check
box is cleared.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
