NETGEAR DGN2200M User Manual

Internet Configuration
9
N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition
Router Front Panel
The wireless modem router front panel contains control buttons and status LEDs.
Internet
Power
USB Mobile Broadband
WPS
DSL
Ethernet LAN Ports
WiFi On/Off
You can use the LEDs to verify status and connections. The following table lists and
describes each LED and button on the front panel of the wireless modem router.
Table 1. Front panel button and LED descriptions
Button/LED Activity Description
WPS
Press this button to open a 2-minute window for the wireless modem router to connect with
other WPS-enabled devices. For more information about using the WPS method to implement
security, see Wi-Fi Protected Setup (WPS) Method on page 32.
Solid green WPS wireless security is being enabled.
Blinking green The device is in the 2-minute interval to synchronize security.
Off WPS is not being set or enabled.

NETGEAR DGN2200M Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
WLAN data transfer rate (max)	300 Mbit/s
Bandwidth	2.4 GHz
Security features	IDS, DoS
Dimensions (WxDxH)	173 x 128 x 33 mm
Minimum system requirements	IE 5.0+
Compatible operating systems	Windows 7 Windows Vista Windows XP Windows 2000 Mac OS
WLAN data transfer rates supported	11, 54, 150, 300 Mbit/s
DHCP client	-
Supported network protocols	TCP/IP, DNS
Antennas quantity	2
Ethernet LAN (RJ-45) ports	4
Security algorithms	WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Certification	CEC, RoHS, WEEE
Cables included	Phone (RJ-11), USB
Product color	Black
LED indicators	LAN, Power, USB, WLAN, Y

Weight and Dimensions

Weight	300 g