NETGEAR Nighthawk SX10 Pro Gaming

3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4.
From the menu at the top of the page, select DIAGNOSTICS.
The CABLE TEST page displays.
5.
From the menu on the left, select PORT STATISTICS.
The PORT STATISTICS page displays, showing the statistics for each of the ports.
6.
To refresh the page with the latest information, click the REFRESH button.
7.
To reset all counters to 0, click the CLEAR COUNTERS button.
Reboot the Switch From the Local Browser
Interface
You can reboot the switch remotely from the local browser interface.
To reboot the switch from the local browser interface:
1.
Open a web browser from a computer that is connected to the same network as the
switch or to the switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4.
From the menu at the top of the page, to the right of NETGEAR, click the three-dot
icon and select Reboot Switch.
A pop-up window opens.
5.
Click the REBOOT button.
The switch reboots. Your switch web session is disconnected and you must log back
in to the local browser interface.
User Manual106Diagnostics and
Troubleshooting
Nighthawk SX10 Pro Gaming Advanced 8-Port Gigabit Ethernet Switch Model GS810EMX