NETGEAR Nighthawk SX10 Pro Gaming

•
Disables power saving for the switch (for more information, see Manage the Power
Saving Mode on page 93).
•
Sets the QoS mode to Port-Based (for more information, see Use Port-Based Quality
of Service and Set Port Priorities on page 38).
•
Disables rate limiting for all ports (for more information, see Set Rate Limits for a Port
on page 42).
•
Sets the LEDs to the standard color scheme (for more information, see Manage the
LEDs on page 94).
Before you apply the Standard Preset mode, you can save your current QoS, port
prioritization, multicast, flow control, and IGMP snooping settings and other settings as
a custom preset mode (see Save Your Quality of Service Settings as a Custom Preset
Mode on page 34) so that you can easily revert to your current QoS configuration.
To apply the Standard Preset mode:
1.
Open a web browser from a computer that is connected to the same network as the
switch or to the switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4.
From the menu at the top of the page, select SETTINGS.
The PRESET MODES page displays. The LOAD tab is automatically selected.
5.
Select STANDARD PRESET.
The APPLY STANDARD PRESET section shows the current settings and the settings
for the Standard Preset mode.
6.
Click the APPLY button.
Your settings are saved.
Monitor the Gaming Traffic and Optimize
the Gaming Settings
You can monitor the downloaded and uploaded traffic on the ports. The traffic is
presented in graphs that show the amount of traffic and achieved traffic speed in Mbps
User Manual32Optimize the Switch
Performance
Nighthawk SX10 Pro Gaming Advanced 8-Port Gigabit Ethernet Switch Model GS810EMX